Backseat Driver guitar/bass tabs A few years ago someone requested tabs for guitar and bass for my Gameboy song Backseat Driver. Thought i’d post it here for you rock bands out there. You can […]
Driving a 12V led from a 5V Arduino pin Today i ordered some big illuminated arcade style push buttons for a project. Each button has a built-in led that should be powered with 12 volts, but the Arduino pins […]
Kawai SX-240 Here’s some info about one of the synthesizers I own; the Kawai SX-240. I bought it from a friend that did not make use of it. It was in nice […]
Step Brother 16 Step Brother 16 was a DIY x0x-style step sequencer based on Arduino and Renoise that i designed and built a prototype of in 2011.
Metalphoto panel tryout I tried out having a front panel made using a technique called metalphoto. It’s a simple, cheap and extremely durable
DIY CV mixer design For practice and fun I made a design for the diy cv mixer I built previously using Synovatron´s kit and DinSync´s schematics. I have made a 10HP eurorack panel using […]
Cornbeast’s super-awesome veggie burgers This is a veggie burger recipe that I have perfected over the years.
Eurorack DIY CV mixer Recently I bought a nice eurorack DIY kit and soldered my own polarizing CV mixer. The DIY kit is a really nice product from Synovatron, check it out: http://synovatron.blogspot.se/p/products.html The […]
Beware of the dreadful MIDI running status! Devices that send MIDI messages may have implemented the “running status” which means the status byte may be omitted if it’s the same as the previous status